Purchasing will be available soon. Build and reserve your set now and we'll email you when we can make it.
Cumbria Contours · Lake District map coasters
Engraved sycamore map coasters

The Lake District, drawn to scale in wood.

Every coaster is a real 1:25 000 contour map of one place in the fells, engraved in sycamore, with any lakes cut out and inlaid with veneer. Pick a summit, a lake, somewhere that matters to you, or a random 100 metre square of the National Park.

467places to choose
10 mbetween contours
100 mmshows 2.5 km
Two finished wooden coasters on a dark table: Hallin Fell with Ullswater curving round the top, and Wast Water behind it
Hallin Fell and Wast Water · 1:25 000
Choosing a coaster

Four ways to pick a place

Each coaster is centred on one spot. The map around it is drawn from survey height data, including Environment Agency lidar, so the shape of the ground is the real shape.

Finished Hallin Fell coaster seen from above, with Ullswater inlaid along the top edge
217 fells

A fell

All 214 Wainwrights, plus Black Combe, Wansfell Pike and Gummer's How. The summit sits in the middle with its trig point, name and height.

Shown: Hallin Fell · NY 433 198 · 388 m
Finished Wast Water coaster with the lake inlaid in dark veneer and its name along the water
Lakes, tarns and reservoirs

A lake

The big lakes and the small tarns. The water is cut out and inlaid with veneer, islands and all, and the name follows the line of the lake as it does on an OS map.

Shown: Wast Water
Coaster of a randomly chosen 100 metre grid square in the fells
1 of 122,400

A random square

We pick one 100 metre grid square of the National Park at random and put it at the centre of your coaster, with the 2.5 km of ground around it. You won't know which square until it arrives. It's one of about 122,400.

Shown: NY 342 165
Made to order

Your own place

The house you grew up in, the fell where you proposed, the campsite you go back to every summer. Send us a six-figure grid reference, a postcode or a pin on a map, and the name you want on it. Don't know the grid reference? Just tell us the place and we'll find it for you, at no extra cost.

Anywhere inside the National Park
217 fells, all 214 Wainwrights among them 38 lakes and tarns by name 1,263 mapped lakes, tarns and reservoirs drawn in 122,400 random squares
A random-square coaster with its 100 metre square marked in the centre
NY 342 165 in the middle, 2.5 km of fell around it
1 of 122,400

The 100 metre square is the heart of a random coaster. It's the spot a six-figure grid reference points to, and it sits right in the centre. Everything else on the coaster is the 2.5 km of ground around it, so you can see where your square lies among the fells.

The National Park covers about 2,362 square kilometres, which makes roughly 122,400 of these squares. Most are open fellside that has never been put on anything.

Close-up of the Hallin Fell coaster: summit triangle, name and height, tree symbols and fine contour lines
Hallin Fell up close · NY 433 198 · 388 m
Reading the map

What's on each coaster

We draw them the way Ordnance Survey draws its Explorer maps, at the same scale, so anyone who walks the fells can read one straight away.

Key

Contours every 10 metresLines close together mean steep ground. Lines far apart mean gentle slopes or a valley floor.
Bolder line every 50 metresCount the bold lines to work out the height, as on a printed map.
SummitA solid triangle on the highest ground, with the fell's name and height beside it.
Lakes and tarnsCut into the wood and inlaid with veneer, then lettered along the water.
Rivers and becksDrawn heavier where more water flows, so the main rivers stand out from the side streams.
WoodsConifer and broadleaved trees, placed from the national forest survey, so the right symbol is in the right wood.
CragsMarked on the steepest rock, where the contours bunch together.
Villages and farmsBuildings as small solid blocks, with village names beside them.
0 to 1 km on a coaster: 40 mm
The first batch

From the workshop

Our first coasters, cut from sycamore with the lakes inlaid in dark veneer.

The making

How each one is made

We make them in small batches in our workshop, six to a board, and finish every coaster by hand.

  1. Choose the wood

    We select only the finest Cumbrian sycamore, then machine it to size, flat and true, ready for the maps.

  2. Draw the map

    Heights, lakes, rivers and woods are pulled from public map data for the exact spot and drawn as an engraving file.

  3. Cut the lake

    The lake shape is engraved into the board as a shallow pocket, with registration holes so the board goes back in exactly the same place after the inlay is glued and sanded.

  4. Inlay the water

    Matching pieces are cut from veneer, glued into each pocket and sanded flush.

  5. Engrave the map

    Contours, rivers, woods, crags and lettering go on, with the fine lines kept fine and the names crisp.

  6. Cut and shape

    Each coaster is cut from the board, then the edge is chamfered and sanded smooth by hand.

  7. Oil

    Two coats of oil bring up the grain and protect the surface from wet glasses.

  8. Felt back

    A felt back is glued on to stop it sliding and protect your table. Then it is checked and packed.

Sets

Sets and prices

Mix any places you like in a set: the fells you have climbed, the lakes you have swum in, or one of each.

Available soon

In a card box

Pair
£25
  • Two coasters
  • Card sleeve
Build this set →
Set of four
£48
  • Four coasters
  • Card gift box
Build this set →
Set of six
£70
  • Six coasters
  • Card gift box
Build this set →

In a handmade wooden box

Set of four
£96
  • Four coasters
  • Wooden box made in our workshop
Build this set →
Set of six
£108
  • Six coasters
  • Wooden box made in our workshop
Build this set →

Every set can mix fells, lakes and random squares. Your own place costs a little more because we draw and check it by hand before it is made. Want twelve, or words on the box? Ask us.

Made to order

Something a bit different?

If the sets above aren't quite right, tell us what you have in mind. We read every request and reply with what we can do and a price.

A bigger set

Eight, twelve or more, mixed however you like.

e.g. twelve fells for twelve grandchildren

Words on the box

A name, a date or a message on the lid of the wooden box.

e.g. "Ruth and Tom, Buttermere, 2026"

A title coaster

One coaster in the set carries your own words instead of a map.

e.g. "The fells we climbed together"

Anything else

A route you walked, a whole round, a gift for a club or a wedding.

e.g. all the summits of the Fairfield Horseshoe
Send us your idea

Tell us what you'd like

There's no commitment. We'll come back to you, usually with a picture of the design, before anything is made or paid for.

What are you after? (tick any)
For businesses

Coasters of your own valley

For hotels, inns, B&Bs, restaurants, pubs and cafés: a map of the ground around your door, with your building marked and your name on it. Guests put their drinks down on the fells they walked that day.

Gift shops can stock sets of their local fells and lakes at trade prices.

From 24coasters per order
Freedigital proof before you commit
Your placecentred on your grid reference
Matchingrepeat orders from the same file

Hotels, inns and B&Bs

  • A coaster in every room with your valley on it
  • Sets to sell at reception or in the bar
  • Gifts for weddings and returning guests

Restaurants, pubs and cafés

  • Table coasters that start conversations
  • Oiled and felt-backed for daily use
  • Reorder single replacements whenever you need them

Gift and outdoor shops

  • Card-boxed sets of four and six
  • Sets chosen for your area, such as Keswick or Ambleside fells
  • Trade price of half retail, minimum four sets

Bulk prices for your own design

QuantityEngravedWith inlaid lake

Every coaster is the same design: your location, your name and the map around it. A one-off design fee of covers drawing and checking your map, and is waived on orders of or more. Delivery is quoted separately.

Shop trade prices: pair £12.50, set of four £24, set of six £35 in card boxes.

Estimate your order

£0per coaster
£0design fee
£0estimated total

How a business order works

  1. Tell us the place

    Contact us with your address or grid reference, the name to engrave, and roughly how many you need.

  2. Free proof

    We draw your map and send you a picture of the finished coaster to check.

  3. Sample

    For orders over 50 we can make one sample coaster for you to hold before the full run.

  4. Deposit

    Half up front once you approve the design, the rest on delivery.

  5. Made in batches

    Engraved, cut, sanded, oiled and felt-backed, 24 at a time.

  6. Delivery

    Delivered by hand around the Lakes, or posted. The file is kept for reorders.

Ready to talk numbers? Contact us with your place and roughly how many you need, and we'll send a proof and a price.

Questions

Common questions

How accurate are the maps?

The ground is drawn from survey height data, and the lakes, rivers and woods from Ordnance Survey and national survey outlines. It is the same scale as an OS Explorer map, so the shape of each fell, the lakes and the becks are where you would expect them. It is a keepsake, not a navigation map, so footpaths are left off.

Is my fell or lake on your list?

Every Wainwright is, along with the lakes and the larger tarns. If yours is not, choose "your own place" and send us the grid reference.

Can I choose the name on the map?

Yes. For your own place we letter the spot with the name you send us, such as a house name or a family name, within reason and within the space on the map.

Why sycamore?

It's pale and close-grained, so even the finest contour lines come out crisp and easy to read. It also takes oil well and wears evenly.

How do I look after them?

Wipe with a damp cloth and let them dry flat. Don't soak them or put them in the dishwasher. A little wood oil once a year keeps them looking fresh.

How long do orders take?

Coasters from the list are made in batches, so we will give you a date when you order. For your own place we send you a picture of the map to approve before we make it.

Get in touch

Contact us

For any enquiry: a question about a coaster, a business or shop order, a gift idea, or anything else. We'll reply by email.